Here in this article we will discuss how to connect to SSH of the firewall using putty utility.
First you need to enable SSH in specific zone under administration >> device access as shown below
Here in the above image, SSH is enabled under LAN zone
Then open the putty utility. You can download putty utility from this URL
The home screen of the putty will look like below image
In place of Hostname or IP address, enter the IP address of the firewall. If you are accessing from LAN zone, enter the firewall LAN IP address. If you are accessing from WAN zone enter firewall public IP address.
In place of port enter “22” and click on the open button.
Home screen of the firewall will be shown like below image
Hope this article helps you.