Avaya Mobility Networking Solutions Integration practice questions
Which PHY data-rate is provided by WLAN standard 802.11ac 4×4 wave 2?
A. 3 Gbps
B. 1 Gbps
C. 2.4 Gbps
D. 3.47 Gbps
While implementing Avaya Mobility Networking Solution for a hotel, the customer decided to provide wireless and Internet access to its guests. When their customers/guests connect a device to the wireless network, they should be forced to authenticate through a web browser. To meet this customer requirement, which application within the Avaya Identity Engines portfolio should be installed and setup?
A. Ignition Dashboard
B. Ignition Analytics
C. Ignition Server
D. Ignition Access Portal
Which channel width is supported by the channel provided in WLAN 9100 wave 2 products?
A. 90-MHz to 180-MHz
B. 50-MHz to 100-MHz
C. 40-MHz to 80-MHz
D. 20-MHz to 160-MHz
You are installing a large wireless LAN infrastructure with more than 250 Avaya wireless LAN 9100 Access Points. Which on-premise Avaya Network Management tool would you implement?
A. Configuration and Orchestration Manager (COM)
B. Wireless Orchestration System (WOS)
C. Visualization, Performance and Fault Manager (VPFM)
D. Avaya Web Wireless Management Interface (WMI)
Which two key features of Avaya WLAN 9100 add value to the Office and Hospitality Network implementation? (Choose two.)
A. Scalable solution with a distributed controller
B. High-performance Application Control
C. Availability with auto unit replacement
D. Secure BYOD and Guest Access
A customer is implementing a BYOD strategy, and allows employees to use smartphones, tablets, and privately owned computers to connect to the corporate network. To ensure this does not impact productivity, they want to restrict network access for non-professional application and websites. To meet the customer requirement, which functionality of WLAN 9100 should be implemented?
A. Application Control
B. Directional Antennas in the high-end Access Points AP917X
C. Guest Access Manager
D. Spectrum optimization through RF Management
E. Additional SSID for private use by employees
How many network interfaces does the IDE Guest Tunneling Server have?
Which command is used to keep the Edge switches in FA proxy standalone mode?
A. fa standalone-proxy
B. fa port-proxy enable
C. fa proxy-standalone-enable
D. fa standalone-port proxy
Which three are components of Fabric Attach architecture? (Choose three.)
A. FA Server
B. FA Proxy
C. FA Mgmt
D. FA Policy Server
E. FA Core
Which four steps are required to configure GRE Tunnels on WLAN 9100 Access Points? (Choose four.)
A. Add a bridge to the tunnel.
B. Change the MTU size to 0.
C. Enter the Primary Remote Endpoint IP address (IGT inbound interface IP).
D. Select Type as “GRE” from the drop-down list.
E. Enter any Tunnel Name.
F. Enter the Local Endpoint IP address (leave blank Access Point address).
When an FA Client is discovered and is attached to the port, which command enables the Edge switch to automatically configure a port to the required mode?
A. fa zero-touch-option auto-port-client
B. fa zero-touch-option auto-port-mode-client
C. fa zero-touch-option auto-port-fa-client
D. fa zero-touch-option auto-port-mode-fa-client
A customer wants to enable FA operations on all VSP switch ports in all the connected switches. Which command is used to perform this operation?
A. fa operation all
B. fa standalone-proxy
C. fa port-enable
D. fa uplink port enable
When an FA Client is discovered and is attached to the port, which method should be followed to enable the switch to automatically configured a port to the required mode?
A. Fabric Connect Zero-Touch
B. Fabric Policy Zero-Touch
D. Fabric Attach Zero-Touch
Using the Access Portal GUI, where are the basic Access Portal parameters configured?
B. Captive Portal
C. General Information
D. Access Portal
Avaya Identity Engines has access policy rules to authenticate and give network access to the users. Where are the guest users located and stored?
A. Active Directory
C. Internal store
D. Dashboard database